Joist Connector Installation Video
Product Grid
| Product |
Size/Fit |
| DTC45 |
to attach 45mm width joist to most size bearers |
| JC7045N |
to attach 45mm width joist to 70mm width bearer |
| JC9045N |
to attach 45mm width joist to 90mm width bearer |
Installation Information
DOUBLE TRIPLE CONNECTOR
FIXING REQUIRED DOUBLE TRIPLE CONNECTOR TO BEARER:
- 2 fixings on one side of bearer and 2 fixings on top of bearer
FIXING REQUIRED DOUBLE TRIPLE CONNECTOR TO joist:
- 2 fixings on each side of joist
Joist Connectors
Fixings required joist connector to bearer:
- 2 fixings on each side of bearer
- Cyclone areas C1 & C2 - 3 Fixings on each side of bearer (not suitable for areas C3 & C4)
Fixings required joist connector to joist:
- Less than 1 metre off the ground - 1 fixing each side of joist
- Higher than 1 metre off the ground - 2 fixings each side of joist
- Cyclone areas C1 & C2 - 3 fixings each side of joist (not suitable for areas C3 & C4)
Approved Fixings:
- 35mm x 3.15mm timber connector nails
- 32mm x 2.7mm Hot Dipped Galvanised coilnails or equivalent (not suitable in cyclone areas)
- 35mm x 8g Galvanised stitching screws (not suitable in Cyclone areas)
Note: Stainless steel equivalents of the above should be used in high corrosion areas.
