Installation Info Buy Online

Joist Connector Installation Video

Product Grid

Product Size/Fit
JC9045N to attach 45mm width joist to 90mm width bearer
JC7045N to attach 45mm width joist to 70mm width bearer
JC4545N to attach 45mm width joist to 45mm width bearer

Installation Information

Fixings required joist connector to bearer:

  • 2 fixings on each side of bearer
  • Cyclone areas C1 & C2 - 3 Fixings on each side of bearer (not suitable for areas C3 & C4)

Fixings required joist connector to joist:

  • Less than 1 metre off the ground - 1 fixing each side of joist
  • Higher than 1 metre off the ground - 2 fixings each side of joist
  • Cyclone areas C1 & C2 - 3 fixings each side of joist (not suitable for areas C3 & C4)

Approved Fixings:

  • 35mm x 3.15mm timber connector nails
  • 32mm x 2.7mm Hot Dipped Galvanised coilnails or equivalent (not suitable in cyclone areas)
  • 35mm x 8g Galvanised stitching screws (not suitable in Cyclone areas)

 

Note: Stainless steel equivalents of the above should be used in high corrosion areas.