KlevaKlip Systems Pty Ltd - Installation info

Merbau Installation

Using Lysaght Firmlok Steel Joists

Board Replacement

Other useful information


90mm Merbau KlevaKlip PDF Fixing Instructions

KlevaKlip MT90G Merbau Clip  


Using KlevaKlip for Screening

For more Information


Corrosion Resistance Of KlevaKlip Metal Clips

Corrosion Resistance Document


Approved Adhesives For KlevaKlip


Timber Type Approved Adhesives
90mm Kiln Dried Merbau Exterior-use construction Adhesive


How many clips do I need for my deck coverage?

As a reasonable rule of thumb guide, provided your joists are placed at the standard 450mm between centres, allow 4 clips per square metre, plus 10% for “starter joist” and wastage.

or

For an accurately calculation on your clip numbers, divide the length of your joist (in mm) by 555mm (the length of one clip), multiply this number by the number of joists in your deck, and allow 5% for “tops and tails” wastage.

TIP – always try and design the width of your deck so that you have full decking boards widths right across your deck. The “pitch” on the Merbau clip is 92.5mm.


Merbau Clips available via Timber Merchants or our Online Store

Timber Merchants

Online Store


Important Information


Copyright © 2018 KlevaKlip Systems Pty Ltd
http://klevaklip.com.au/printed.aspx?active_page_id=463